Banners
Latest posts!
Re: URF + XRF = OTAMP ? Can you confirm the setting on each decice for the following AT commands?
ATBD
ATRI
ATMY
ATRC
ATRP
You can use either XCM and download config or typing directly into the main serial...
Re: Srf comms with xcm Bare in mind with our radios you can have different baud rates at different ends. As they have internal buffers for both RX an TX streams.
Would might just need to throttle data going from a fast...
Re: Raspberry Pi with SRF We only offer them a separate firmwars. There are to many possible combinations that different users could come up with for us to make and maintain any more.
For your project in can offer too...
Re: Raspberry Pi with SRF Side question:
is there firmware so I can use the Dualbuttons and have a thermistor on the same board?
Because at the moment the firmware is plit up into the different kits you can buy.
Main...
Re: Raspberry Pi with SRF oh man, can't believe i made a beginner mistake by not following the syntax to the bone.
Thanks it's working now
Re: Raspberry Pi with SRF Hi,
Try aAAINTVL015S, apart from the first letter 'a' all letters should be in upper case.
Re: RFu368 + SRF Sleep pi Thank you!
I write some arduino code to run the AT commands needed. Or just solder in TX/RX and connect it to a FTDI.
-André
Raspberry Pi with SRF + X Hardware used:
Raspberry Pi model B with Xbian (latest) installed with Slice of Radio
3 XRF's to be combined with
a) Thermistor temperature sensor kit
b) Dual button kit
c) XRF...
Re: RFu368 + SRF Sleep pi Sorry have just updated our docs
http://openmicros.org/index.php/articles/88-ciseco-product-documentation/294-rfu328-technical-data
D4 is the pin you need.
You will also need to use the AT...
RFu368 + SRF Sleep pin I can see on RFu368 that the sleep pin for SRF is connected somewhere.
I just wonder which pin on the Ardiuino it is connected to, as I send data every 100mS, and like to put the SRF in sleep...
Re: Srf comms with xcm a couple of my issues, all worked out:
typing in the main window at the serial monitor page did the trick. a note about it, that i thought odd - when i typed +++ in the single line bar at the top, i...
Re: Problem on XBBO inter Perfect! That explains everything! Thank you very much. We will replace it with a 0.5A voltage regulator. I will post the result when test it.:woohoo: